884 MC 3PH 400V Gate Motor (3500KG)
The 884 operator has been manufactured to handle the heaviest commercial or industrial-type gates in the simplest, most convenient way.
Exceptional Support Strength
The industrial design is guaranteed by the exceptional performance characteristics of the gate motor, which allows a frequency of 100% uninterrupted use for gates weighing up to 2000 Kg.
Protection in Movement
A corrosion-proof coating that is highly resistant to atmospheric agents, combined with IP55 protection of the operator, fully enhances the durability and safety for which FAAC electromechanical technology is renowned.
Anti-crushing safety is ensured by an electronic device which adjusts the drive torque directly.
Maximum Service, Minimum Maintenance
Maintenance has been reduced and made easier with the ability to access the operator without removing the gate. Additionally, electricity consumption is minimised by the system’s outstanding mechanical efficiency.
• Twin-disk clutch in oil-bath
• Breaking device: reduces stop spaces and keeps the gate in the closed position
• Steel housing protected by cataphoresis treatment and polyester paint
|Model||884 MC 3PH|
|Power supply voltage||380-415V~ 3 50/60 Hz|
|Motor||Three-phase with four poles|
|Max. power||850 W|
|Max. torque||0 ÷ 155 Nm (*)|
|Max. expressed force||3.200 N (*)|
|Max. leaf width||42 m|
|Speed adjustment and motor control||No|
|Limit switch||Roller lever micro switch|
|Force adjustment||Twin-disk clutch in oil-bath|
|Operating ambient temperature||-20°C ÷ +55°C|
|Type of oil||FAAC HP OIL|
|Dimensions (LxDxH)||430 x 310 x 586 mm|
|Max. leaf weight||3,500 Kg|
|Use frequency||100% (up to 2,000 Kg) – 50% (over 2,000 Kg)|
|Electronic equipment||884T incorporated|