J SERIES TRAFFIC BOLLARD

 

An automatic bollard for intensive use easily installed and maintained offering excellent lifetime cost-efficiency. The drive unit is mounted within the cylinder; even the basic bollard comes with 12 built-in flashing LEDs, buzzer, emergency release and mechanical release.

Foundation boxes are unique in that they are sectional, with a standard descent time of 3.5 seconds, and a rapid setting allowing a decent time of just 1.2 seconds. The bollard also boasts a gentle stop function to grant soft stop on limit switches. There is the ability to replace existing FAAC City bollards by installing the J Series bollard in the existing pit. The bollard can withstand traffic coming from all directions.

The bollard has two fast connectors for low- and high-voltage for rapid connection/disconnection. In addition, limit switches for both the raised and lowered positions mean that the status of the bollard is known at any time. The FAAC J275 Fixed traffic bollard does not require either invasive laying operations or electric wiring.

It is therefore suitable for permanent installations in order to define pedestrian areas, or for mixed installations together with other automatic or semi-automatic bollards.

 ModelJ275 HA H600J275 HA V2 H600 INOXJ275 HA V2 H800J275HA V2 H800 INOX
 MovementHydraulic operatorHydraulic operatorHydraulic operatorHydraulic operator
 Cylinder height600mm600mm800mm800mm
 Cylinder diameter275mm275mm275mm275mm
 Cylinder materialSteel S235JR EN 10219 (thick. 7mm)AISI 316L satin finished (thick. 6mm)Steel S235JR EN 10219 (thick. 7mm)AISI 316L satin finished (thick. 6mm)
 Cylinder materialCataphoresis and polyester powder painted RAL 7021 metallic dark greySatin finishedCataphoresis and polyester powder painted RAL 7021 metallic dark greySatin finished
 Cylinder material headRAL 9006 AluminiumRAL 9006 AluminiumRAL 9006 AluminiumRAL 9006 Aluminium
 Rising time5 seconds5 seconds7 seconds7 seconds
 Lowering time (standard)3.5 seconds3.5 seconds4.5 seconds4.5 seconds
 Lowering time (rapid)YES (selectable)YES (selectable)YES (selectable)YES (selectable)
 Emergency lowering time1.2 seconds1.2 seconds1.5 seconds1.5 seconds
 Obstacle detection on device in risingYESYESYESYES
 Release deviceYESYESYESYES
 Absorption230V – 50 (60Hz)230V – 50 (60Hz)230V – 50 (60Hz)230V – 50 (60Hz)
 Max power220 W220 W220 W220 W
 Protection classIP67IP67IP67IP67
 Recommended useIntensive use (traffic)Intensive use (traffic)Intensive use (traffic)Intensive use (traffic)
 Reflecting strip height55mm55mm55mm55mm
 Standard reflecting strip colourOrangeOrangeOrangeOrange
 Impact resistance38000 J67000 J38000 J67000 J
 Crash resistance128000 J207000 J128000 J207000 J
 Total weight167 Kg167 Kg195 Kg195 Kg
 Pit weight55 Kg55 Kg65 Kg65 Kg
 Bollard weight112 Kg112 Kg130 Kg130 Kg
 Operating ambient temperature-15/+55oC-15/+55oC-15/+55oC-15/+55oC
 Operating ambient temperature with heater-25/+55oC-25/+55oC-25/+55oC-25/+55oC
 Pit to wall in with modular cylindrical profile560 x 560 x 950 mm560 x 560 x 950 mm560 x 560 x 1.220 mm560 x 560 x 1.220 mm
 Excavation dimensions1.000 x 1.000 x 1.250 mm1.000 x 1.000 x 1.250 mm1.000 x 1.000 x 1.540 mm1.000 x 1.000 x 1.540 mm
 Connection cableStandard 16+1 conductor cables, minimum sec􀆟 on 1.5mm (not supplied)Standard 16+1 conductor cables, minimum sec􀆟 on 1.5mm (not supplied)Standard 16+1 conductor cables, minimum sec􀆟 on 1.5mm (not supplied)Standard 16+1 conductor cables, minimum sec􀆟 on 1.5mm (not supplied)
 Cable max. length50m50m50m50m