FS 60 / 120 / 240 – FIRE RATED SHUTTER FOR RESISTANCE OF 1, 2 OR 4 HOURS
Meet fire regulations and reduce risk with a rated fire shutter. These products contain fire in an area of a building for 1, 2 or 4 hours. The addition of an interface panel allows them to be integrated into an alarm system for an automatic response in the event of an emergency. They are therefore commonly used in applications such as canteens and schools. The FS steel fire shutter range has been tested at Exova Warringtonfire under BS EN 1634-1:2008 test conditions and are assessed to BS EN 476-22:1987. Sizes up to 50m2 can be achieved with the use of barrel support frames.
FS60
The FS60 fire shutter contains fire for 1 hour. This rating is a result of external testing by market leading Exova Warringtonfire. All of Roché’s fire shutters can be integrated into a building fire alarm system for automatic response in the event of an emergency. They are manufactured from galvanised steel and can also be powder coated any RAL / BS colour.
Speak to the Roché team for advice on which security shutter is most suitable for your requirements. We can also arrange a free survey from one of our exerienced engineers.
FS120
The FS120 is a 2 hour rated fire shutter which has been certified by Exova Warringtonfire. The addition of an integration panel allows the shutter curtain to automatically lower in the event of a fire. Barrel support frames help maintain the structure’s integrity, even when under direct attack from flames. Optional powder coating is available in any RAL / BS colour.
Speak to the Roché team for advice on which security shutter is most suitable for your requirements. We can also arrange a free survey from one of our exerienced engineers.
FS120
The FS120 is a 2 hour rated fire shutter which has been certified by Exova Warringtonfire. The addition of an integration panel allows the shutter curtain to automatically lower in the event of a fire. Barrel support frames help maintain the structure’s integrity, even when under direct attack from flames. Optional powder coating is available in any RAL / BS colour.
Speak to the Roché team for advice on which security shutter is most suitable for your requirements. We can also arrange a free survey from one of our exerienced engineers.
FS240
APPLICATIONS
High security commercial and service sites, up to 50m², with 4 hour fire rating to stop spread of fire through an opening. The Steelroll FS60 has been tested at Exova Warringtonfire under BS EN 1634-1:2008 test conditions, and assessed to BS EN 476-22:1987, to contain fire within particular parts of a building. In the event of a fire alarm, the shutter automatically descends by operation of the motor. Further failsafe devices to ensure higher levels of response to a fire outbreak or alarm.
CURTAIN SLAT
Single skin 76mm curved steel. Standard galvanised finish. Wall thickness 0.7mm, 0.9mm, or 1.2mm, depending on overall shutter opening width.
Colours: Galvanised finish as standard. Plastisol and powder coating available.
Visible Surface :: 76mm
Profile Height :: 86.6mm
Weight per m² :: 9.8kg / 12.5kg / 16.7kg (dependant on wall thickness)
Maximum Width :: 9000mm (without barrel support frames) / 12000mm (with barrel support frames)
Maximum Surface :: 20m² to 50m² (dependent on motor and barrel support options).
ENCLOSURE / HOUSING
Manufactured from 0.8mm galvanised steel sheet.
End caps are fabricated from 5mm+ steel. A barrel support frame at the centre of the housing may be required in some applications.
Colours: Galvanised finish as standard. Plastisol and powder coating available.
ALL MOTORS, WITHOUT BARREL SUPPORT FRAME:
Guide Height (mm) Plate Size* (mm)
2500 305
4000 355
6000 400
TUBULAR MOTOR, WITH BARREL SUPPORT FRAME:
Guide Height (mm) Plate Size* (mm)
2695 305
4000 355
5000 400
OUTBOARD MOTOR, WITH BARREL SUPPORT FRAME:
Guide Height (mm) Plate Size* (mm)
5000 400
6000 450
*These sizes apply to shutters without barrel support frames and will vary where barrel support is required. Plate sizes shown as a guide only and may increase dependent on shutter width.
GUIDE CHANNELS / BOTTOM SLAT
Galvanised steel sections with strengthened T-shape bottom bar. Guide channel depth will vary dependent on application from 50mm to 100mm.
Colours: Galvanised finish as standard. Plastisol and powder coating available.
Note: the guide channels are bolted to fixing angles or steel box sections dependent on the application. See drawings on this sheet.
OPERATION
Tubular Motor = Single phase tubular motor operated via key switch.
Inline Motor = Single phase inline chain driven motor (three phase option available) with push button control, chain override, fusible link and solenoid release as standard.
All shutters can be connected to a fire alarm via an interface panel so they automatically descend in the event of an alarm signal.
CE compliant to all relevant European directives and regulations.