TRAPEX PEDESTRIAN ACCESS CONTROL FOR TRAFFIC BARRIERS

The TRAPEX barrier fence is a robust and effective barrier designed to prevent pedestrians from circumventing the SECTOR vehicle access control system. It’s tough, all-weather aluminium construction makes it suitable for coastal and inland applications. The robust materials and clever industrial design ensures that the TRAPEX will perform day in and day out, relentlessly, for a very long time.

MAIN FEATURES:
  • Clever design and tough construction prevents fence from being pushed aside.
  • Quick and easy to install – saving you time and money.
  • All-weather materials ensuring a long, good-looking lifespan.
  • Intelligent, modular design for ease of transportation and installation.
  • Semi-assembled modules with comprehensive installation kit.
TRAPEX TECHNICAL DATA:
 INSTALLATION CONSIDERATIONS – SECTOR BARRIERS
BOOM POLE LENGTHREQUIREMENTS
 Existing Installation:
All LengthsTRAPEX cannot be used with the SECTOR Breakaway Coupling on the same barrier pole.
3.0mThe counterbalance spring in the 3m SECTOR barrier must be upgraded to a 4.5m unit. ref:1187M01050A The running speed of the SECTOR operator must be reduced to correspond to that of a 4.5m barrier (raise/lower time to change from 1.2 to 3 seconds)
4.5mThe counterbalance spring in the 4.5m SECTOR barrier must be upgraded to a 6.0m unit. ref: 1187M010500
6.0mIt is not possible to fit TRAPEX to a 6m SECTOR barrier
 New Installation:
All LengthsTRAPEX cannot be used with the SECTOR Breakaway Coupling on the same barrier pole
3.0mA 4.5m SECTOR barrier must be ordered for this application with a 3m boom pole of TRAPEX
4.5mA 6m SECTOR barrier must be ordered for this application with a 4.5m boom pole of TRAPEX
6.0mIt is not possible to fit TRAPEX to a 6m SECTOR barrier
TRAPEX DIMENSIONS & MATERIALS:
  • Modular sections length: 1.5 metres, pre-assembled.
  • Vertical members: six per 1.5m length @ 250mm spacing.
  • Vertical member length that extends above barrier pole: 95mm.
  • Vertical member length below barrier pole: 692mm.
  • Fence members: Ø19 aluminium round tube.
  • Mass: 1.3kg/m (1.5m module = 2kg).
  • Aluminium flatbar section: 25mm x 5mm.
  • Rivets used to fit the aluminium flatbar: 5mm.
  • It’s advisable to lubricate the moving parts of the linkage assembly with easy to obtain Q20.